分享
[問題] 無限紅燈208
chang104122016-7-10 16:29
Error 208 is a generic HMD error message. This error can have a number of solutions, so please work from the list below to make sure you've attempted all available solutions:
Error 208是個頭戴顯示器錯誤訊息的泛稱。 這個錯誤可能有許多解決的方法，所以請嘗試下列所有可能的方法來解決
1.Make sure that your Vive’s link box and the monitor or TV you use as a primary display are plugged into the same graphics card.
If you are connected to your onboard display adapter, you will see an Intel HD Graphics device listed in your SteamVR system report.
Onboard cards, such as those connected to a PC’s motherboard, will not be powerful enough to use the Vive.
Reconnect your Vive to your PC’s dedicated graphics card.
1.確認vive的link box與你主要的顯示器是插在同一張顯示卡上。
如果你是連接在內建顯示晶片上，你將會在steamVR的系統報告中看到Intel HD Graphics device。
內建顯示晶片將不足夠來使用Vive。
重新連接Vive至獨立顯卡上。
2.Check to make sure you are in Direct Mode by going to Settings > Developer > Direct Mode.
Click the button that says “Enable Direct Mode.” SteamVR will restart with this setting.
If Direct Mode is not enabled, SteamVR will still work in Extended mode.
For this to work correctly, make sure your displays are extended in Windows > Display Settings.
2.確認是否使用"Direct Mode"，可以從steamVR的小視窗點選右鍵=>設定=>開發者=>"Direct Mode"
點選確定"啟用Direct Mode直輸模式"，steamVR將會重新開啟。
如果Direct Mode未打開，steamVR將會運作在"Extended mode延伸模式"
為了正確運作，確認你的顯示已設定為延伸(Windows > Display Settings)。
3.Make sure all cables are connected firmly. The power cord on the HMD itself can become loose from usage. To check this, remove the cable panel on top of the HMD by pushing it forward.
3.確認線材連接是否牢靠，在頭戴顯示器那端有可能會因為使用而鬆脫。把頭戴顯示器上方面板往前推來移除面板，並檢查線材有無鬆脫。
4.Make sure your Link Box is installed in the correct direction. The orange tipped cables from the Headset should be connected to the orange ports on the Link Box.
4.確認與link box 線材是否安裝正確方向。橘色線材應插入link box的橘色孔位
5.Check to make sure you have the latest video drivers.
5.確認顯示卡驅動程式是否為最新的。
再不行可以嘗試以下網站
staem VR 官方說明 https://support.steampowered.com/kb_article.php?ref=8566-SDZC-9326&l=traditional%20chinese
國外Vive論壇 https://www.reddit.com/r/Vive/
本文章最後由( VR初心者 )於 2016-7-10 16:32 編輯
查無原作者2016-7-10 19:13
VR初心者 發表於 2016-7-10 16:29
Error 208 is a generic HMD error message. This error can have a number of solutions, so please work ...
2.Check to make sure you are in Direct Mode by going to Settings > Developer > Direct Mode.
Click the button that says “Enable Direct Mode.” SteamVR will restart with this setting.
If Direct Mode is not enabled, SteamVR will still work in Extended mode.
For this to work correctly, make sure your displays are extended in Windows > Display Settings.
2.確認是否使用"Direct Mode"，可以從steamVR的小視窗點選右鍵=>設定=>開發者=>"Direct Mode"
點選確定"啟用Direct Mode直輸模式"，steamVR將會重新開啟。
如果Direct Mode未打開，steamVR將會運作在"Extended mode延伸模式"
為了正確運作，確認你的顯示已設定為延伸(Windows > Display Settings)。
這一點是說
如果windows桌面是設定延伸桌面(亮綠燈)，就設定extended mode
如果(只有單個顯示器) 不是(就是插上去二眼都沒畫面) 而且亮紅燈，就用direct mode
是這樣吧
我延伸桌面只有右眼，解析度720x480，亮綠燈，steamvr無法連接
按direct mode 完全沒反應 燈紅的，steamvr完全無效
我想我都有亮過右眼了，應該不是線接錯才是
唉唉
很容易查到的解法，我們使用者都麻早就試了~~~ 一定是都沒用才上來問啊
一定是都沒用才上來問啊
一定是都沒用才上來問啊
一定是都沒用才上來問啊
一定是都沒用才上來問啊
一定是都沒用才上來問啊
像那個按住按鈕開hmd更新韌體的方法 這種搜尋不到的 才是重點
然後我試了沒辦法更新hmd韌體 @@ 檢舉 回應
分享