標題: MSI GS70 2QE Stealth Pro 啟動時失敗！ [打印本頁] 作者: 84ffa6b3-2990-40ed-92a6-96dcf5e9f711 時間: 2016-5-15 16:23 標題: MSI GS70 2QE Stealth Pro 啟動時失敗！ 我使用的平台是MSI GS70 2QE Stealth Pro，但是一開始要進行StramVR的連接時，就是出現了錯誤代碼208：頭帶式螢幕似乎沒有連接好，但是很見鬼的是，系統一直說連結不到頭戴式螢幕，但是頭戴式螢幕裡面卻有畫面，如果說是 USB孔或是HDMI孔有問題的話那也就算了，現在卻是明明有畫面，但是StreamVR一直顯示頭戴式裝置沒有就緒，硬要開始「房間設定」的話，就會出現「無法啟動Could Not Start openvr.tool.steamvr_room_setup」那一個錯誤訊息，很明顯的，找客服也沒人理我，現在到底開怎麼辦呢？作者: 1e36ecea-12ba-475e-a98f-0216427f1bf3 時間: 2016-5-15 17:42
這是英文版的QA，試看看以下方法吧:
Error 208 is a generic HMD error message. This error can have a number of solutions,
so please work from the list below to make sure you've attempted all available solutions:
1.Check to make sure you are in Direct Mode by right clicking the Headset icon on SteamVR. If there is no checkmark next to Direct Mode, select Direct Mode to enable it.
確認你已經勾選在SteamVR裝置中的DirectMode，如果沒有請勾選啟動它
2.If Direct Mode is not enabled, SteamVR will still work in Extended mode. For this to work correctly, make sure your displays are extended in Windows > Display Settings.
如果無法開啟DirectMode，SteamVR將使用延伸模式。為了正常運作，請從windows>顯示設定確定你的顯示已經使用延伸模式
3.Make sure all cables are connected firmly. The power cord on the HMD itself can become loose from usage. To check this, remove the cable panel on top of the HMD by pushing it forward.
確認線材是否連接好
4.Make sure your Link Box is installed in the correct direction. The orange tipped cables from the Headset should be connected to the orange ports on the Link Box.
確認線材連接方向，橘色的線材應插在橘色的孔
5.Check to make sure you have the latest video drivers.
確認驅動程式是否為最新版